RutGuard™ Geocell Helpful Hints

RutGuard™ Geocell - Proudly Made in the USA

RutGuard™ Geocell - Proudly Made in the USA

RutGuard™ is manufactured in the USA with all virgin HDPE resin and no recycled material. The panels are ultrasonically welded together to provide maximum strength.  SO, WHY IS THIS IMPORTANT? The materials used in manufacturing geocell make the world of difference when shopping for a solution fo...
ADA Compliancy and Accessibility - Geocell

ADA Compliancy and Accessibility - Geocell

A common inquiry that we receive about geocell is: "Is it ADA Compliant?" When it comes to geocell, ADA compliancy is dependent on the material that the geocell panels are with. Typically, for pathways and trails that generally receive pedestrian traffic, a 2" to 3" geocell panel is recommended t...
RutGuard™ Recommendations

RutGuard™ Recommendations

Anchoring Sloped Areas with J-Hooks or Rebar A general rule of thumb to use when determining if your RutGuard™ panels need to be anchored to your sloped area is that typically slopes at a 3:1 or 33.5% degree are considered stable.* With that being said, based on specific site conditions and prefe...
Curves, Turns and Slopes | RutGuard

Curves, Turns and Slopes | RutGuard

RutGuard | Design Flexibility  Driveways and pathways come in many different shapes, sizes, and layouts. Circular driveways, horseshoe driveways, curves, turns, and slopes are all common when it comes to roads or paths. Thankfully, RutGuard is designed to fit almost any area. RutGuard panels are ...
Choosing an Infill Material

Choosing an Infill Material

Gravel, Crushed Aggregate, Sand..  Every project is different, and there are different types of material that can be used inside RutGuard®. The typical rule of thumb when it comes to sizing, is to make sure that the size of the rock does not exceed 3/4 inches of the size of the cell opening. This...