Project Archive - RutGuard Stabilization Products

RutGuard 2" panels were used to stabilize the steep slopes that lead down to a concrete patio area in the backyard of a beautiful hillside residence. The grassy hill lead over to a steep slope with a soil/clay subgrade. The resident was in need of a solution that would provide erosion control and...

6" tall RutGuard panels were used to reinforce a 700 square foot area that was constantly needing to be repaired and maintenance due to heavy washout and poor drainage near a culvert crossing in Florida.  The geocell panels were installed on either side of a concrete low water culvert crossing t...

Over 1,500 square feet of RutGuard 2" panels were used to strengthen the sub-base to create a solid foundation for artificial turf grass throughout a beautiful backyard space in West Texas. By using geocell to confine material in the sub-base, prep-work and material was significantly reduced as ...

A Texas tree farm and nursery was in need of a long-term solution for the repair of the sloped plots that support several heavy potted trees.   These images show the foundation before RutGuard Geocell was used.  Preparation:The installation area was prepared per site specifics. The existing fabri...

With proper installation, infill material and anchoring (as needed), geocell is designed to reduce erosion while adding support to existing slope profiles. It is recommended to consult with a local landscaper or contractor for site-specific recommendations as no two projects are alike.

A homeowner was searching for a permeable solution for their driveway. Instead of installing 12" of loose aggregate throughout the driveway area, RutGuard 4" panels were expanded and filled with gravel material, reducing the amount of material needed for the project. Through confining material wi...